27 Years of Precision ManufacturingAccuracy to ±0.005 mmExports to 42+ Countries
Typically replies within 24 hours
AXIOMMOLDS
Outside Rings for PL Side Exchange Date Mark Pin Sets (10/11/12 Indication)

Outside Rings for PL Side Exchange Date Mark Pin Sets (10/11/12 Indication)

Outside Rings for PL Side Exchange Date Mark Pin Sets (10/11/12 month indication) provide clear month marking with a concave character geometry. The press-fit mounting helps maintain stable positioning during mold operation.

  • Concave character design for legible date and month readings
  • Press-fit type outside ring only for straightforward assembly
  • Dedicated 10/11/12 month indication supports reliable scheduling control
  • Supports selectable outside ring character set for your PL side exchange system
Request a QuoteBack to Category

Specifications

98 configurations available

Indication markSpecified number of characters of outside ringMonth indicationD (Outer diameter) (mm)Year (year)Engraving character designationtype
Month-10/11/12 indication4---
Month-10/11/12 indication5---
Month-10/11/12 indication6---
Month-10/11/12 indication8---
Month-10/11/12 indication10---
Month-10/11/12 indication12---
Month-10/11/12 indication16---
Month-10/11/12 indication20---
Day (1st digit)--4---
Day (1st digit)--5---
Day (1st digit)--6---
Day (1st digit)--8---
Day (1st digit)--10---
Day (1st digit)--12---
Day (1st digit)--16---
Day (1st digit)--20---
Day (10th digit)--4---
Day (10th digit)--5---
Day (10th digit)--6---
Day (10th digit)--8---
Day (10th digit)--10---
Day (10th digit)--12---
Day (10th digit)--16---
Day (10th digit)--20---
Day (31 uniform divisions)--16---
Plain--4---
Plain--5---
Plain--6---
Plain--8---
Plain--10---
Plain--12---
Plain--16---
Outside ring character designation1 places-4-※Designation by WOS-
Outside ring character designation1 places-5-※Designation by WOS-
Outside ring character designation1 places-6-※Designation by WOS-
Outside ring character designation1 places-8-※Designation by WOS-
Outside ring character designation1 places-10-※Designation by WOS-
Outside ring character designation1 places-12-※Designation by WOS-
Outside ring character designation1 places-16-※Designation by WOS-
Outside ring character designation2 places-4-※Designation by WOS-
Outside ring character designation2 places-5-※Designation by WOS-
Outside ring character designation2 places-6-※Designation by WOS-
Outside ring character designation2 places-8-※Designation by WOS-
Outside ring character designation2 places-10-※Designation by WOS-
Outside ring character designation2 places-12-※Designation by WOS-
Outside ring character designation2 places-16-※Designation by WOS-
Outside ring character designation3 places-4-※Designation by WOS-
Outside ring character designation3 places-5-※Designation by WOS-
Outside ring character designation3 places-6-※Designation by WOS-
Outside ring character designation3 places-8-※Designation by WOS-

Product Guide

🏭Application Scenarios+

This outside-ring insert is used in PL side exchange date mark pin sets where month/day information must remain readable through repeated mold cycles. The concave character geometry is designed to produce sharp, high-contrast impressions for production labeling and traceability.

  • Automotive and packaging parts: commonly integrated into regrindable date-mark tooling to support consistent monthly scheduling, especially where the mark is verified by downstream inspection systems.
  • Medical device housings and regulated components: the press-fit outside ring helps maintain stable positioning, reducing character drift that could affect legibility on molded surfaces.
  • Flexible PL side exchange systems: its dedicated 10/11/12 month indication supports straightforward configuration of the exchange mechanism without reworking core logic.

Because this variant is fixed for the 10/11/12 month marking and uses a press-fit mounting approach, it is well-suited to tooling lines that demand repeatable, maintenance-friendly date code printing.

🔧Material & Process Details+

The provided data specifies functional geometry and dimensions (concave character design, press-fit mounting) but does not include a steel grade, heat-treatment state, or hardness value for this outside ring.

  • Material & heat treatment: not specified in the given documentation, so wear resistance and toughness should be confirmed with the supplier’s material certificate for this part number.
  • Manufacturing process: the part is an engraved/outside-ring insert intended for press-fit installation, implying precision machining and character engraving to achieve consistent legibility.

When selecting alternatives, engineers should compare the surface condition (for character wear), expected shot count, and the intended exchange frequency. If multiple material options are available for the same character set, specify the grade/tempering process to balance wear resistance against impact toughness under cycling.

📐Sizing & Selection Guide+

Selection is driven by the outside diameter parameter D (outer diameter) = 4 ~ 20 mm and the required number of characters. The outside ring supports 1 ~ 12 specified outside-ring characters, while the month indication is fixed to 10/11/12 and the year is fixed to 26 for this series variant.

  • Match to cavity/core window: choose the D that fits your PL side exchange date mark mechanism and provides proper clearance for press-fit assembly.
  • Confirm character layout: ensure the outside ring character designation and the needed month/day format align with your system’s indexing logic (month is fixed; day can be 1st digit, 10th digit, and 31 uniform divisions as applicable).
  • Verify tolerance & fit: since this is a press-fit outside ring only, use your mold shop’s press-fit tolerance window to prevent character looseness while avoiding overstress during installation.

For the engraving character designation, this series uses ※Designation by WOS; confirm the exact glyph set required by your production documentation.

Frequently Asked Questions

Which month indication is fixed for series 110200050240, and how does it affect date marking logic?+
For this outside-ring set, the month indication is fixed to 10/11/12. That means your PL side exchange mechanism should be configured so the month field uses this specific outside ring, while day and other fields follow your date-mark pin set’s indexing scheme.
What outer diameter (D) range is available for selecting the correct outside ring fit?+
The specified outer diameter D range is 4 ~ 20 mm. Select the D that matches the corresponding PL side exchange mounting interface in your date mark pin set to achieve a stable press-fit assembly.
How many characters of the outside ring can be specified for this product, and what does that mean for layout?+
The product supports 1 ~ 12 specified outside-ring characters. Use this range to match the required character count for your molded date format, ensuring the concave characters align with the marking position on the part.
Is this part intended to be mounted by press-fit, and does it include the pin set components?+
This item is described as an outside ring only with press-fit mounting for the PL side exchange system. It does not replace the full pin set; it should be installed as the outside ring component compatible with your existing date mark pin set assembly.
What engraving character designation is used, and where should engineers verify glyph requirements?+
The engraving character designation is listed as ※Designation by WOS. Engineers should verify the exact glyph set required by their internal drawing/specification and confirm the WOS designation corresponding to their inspection and traceability standards.

Need Custom Specifications?

Our engineering team can help with custom configurations, material selection, and volume pricing.

Get a Free Quote →WhatsApp Us